Project Of Beer Can Filling Line With Capacity 2,000BPH

Project Of Beer Can Filling Line With Capacity 2,000BPH

1, Parameter Capacity : 15 00can/H( 25 CPM-Can Per Minute) Filling product : Beer Filling temperature : 0~4 ℃ Container size : Aluminum can( 11/202 x 413 Aluminum Can ) Voltage : 220V 60HZ 3 phase 2, Price list of equipment Water and electricity for production customer prepared. Take Notice...

Product Details


 

1, Parameter

Capacity:    1500can/H(25CPM-Can Per Minute)

Filling product:       Beer

Filling temperature:        0~4

    Container size :       Aluminum can(11/202 x 413 Aluminum Can)

Voltage220V 60HZ 3 phase

 

2, Price list of equipment

NO

Name

Model

Capacity

Qty

Total price(RMB)

1

 

Inflatable filling sealing machine

BJM4/4/1

1,500BPH

(25 CPM - Can Per Minute)

 

1 set

75000

2

Conveyor

4M

3

Gravity auger track Rinser

1 set

16000

4

Can uploading table and packaging table

1 set

3800

Total

94,800

Water and electricity for production customer prepared.

Take Notice please:

1)Price: Including tax without shipping cost

2)Place of delivery: In Factory

3)Delivery time: 25working days(Except Chinese Holiday) after deposit and can and cap samples received.

4)Payment term: T/T 30% deposit advanced, 70% balance after inspection in our factory and before shipment.

5)After-sale service: Our engineer will be sent to your factory for installation, commissioning, operation and training. Return air tickets, food, accommodation, and engineers $80 wages /each/day are the buyer.

6)Warranty: We provide one year guarantee and life-time technical support, quick-wear spare parts for one-year will be with machines.

7) Packing method: Export Wooden Case with smoked free

 

Specification and Parameter:

 

Working principle of machine:

1, When empty cans go into the first set automatically by conveyor, gas tubes (carbon dioxide) automatic down to the bottom of the cans and inject carbon CO2(carbon dioxide), which exchange the air inside the can due to the density different of carbon dioxide and air.

 

2, The can Injected co2 goes into the second set automatically by conveyor,, beer tube automatic down to the bottom of the cans and filling beer.

 

3, Filled cans go into the sealing machine automatically by conveyor, before sealing, inject CO2

again then start sealing, which ensure theres no air inside of the can.

 

Technical parameter

Model

BJM4/4/1

Capacity

1500BPH

Inflatable head

4

Filling head

4

Sealing head

1

Suitable can diametermm

 

Suitable can diameter: φ50-φ90mm

Suitable can height: 100-160mm

Suitable can diametermm

 

Suitable can diameter: φ50-φ90mm

Suitable can height: 100-160mm

Motor powerKW

1.65

Outside dimension

2200*1000*2000

Machine total weight(Kg)

500

Configuration

Main electrical components

No

Name

Producer

1

PLC

Japan Mitsubishi

2

Inverter

Japan Mitsubishi

3

Touch screen

Taiwan WEINVIEW

4

button ,light

Schneider France

5

Low pressure circuit breaker

Schneider France

6

Control relay

Schneider France

7

AC contactor

Schneider France


Detail information:

 

CUSTOMER: IPS

PRODUCT SIZE: 355ml 211Diameter/202Neck x 413Height Aluminum Can

PRODUCTION RATE: 1,500cph or (25cpm - Can Per Minute)

FILL PRODUCT: Beer

 

 

CAN UPLOADING TABLE

· Used for can storage before rinsing

 

GRAVITY TRACK RINSER

· Declining Twist Rinser Arrangement

Twist Rinse Decline Angle 30 

Rinser Spray Nozzles Piping have Single Point Connection

Track and Rinser are supported 

· Trackwork Rinser Infeed and Trackwork Rinser Discharge

· Fully Enclosed Spray Area to contain Spray Mist and Water Runoff

· Under Track Drip Pan with Drain

Suitable can diametermm

 

Suitable can diameter: φ50-φ90mm

Suitable can height: 100-160mm

Motor powerKW

1.65

Outside dimension

2200*1000*2000

Machine total weight(Kg)

500

Configuration

Main electrical components

No

Name

Producer

1

PLC

Japan Mitsubishi

2

Inverter

Japan Mitsubishi

3

Touch screen

Taiwan WEINVIEW

4

button ,light

Schneider France

5

Low pressure circuit breaker

Schneider France

6

Control relay

Schneider France

7

AC contactor

Schneider France


Detail information:

 

CUSTOMER: IPS

PRODUCT SIZE: 355ml 211Diameter/202Neck x 413Height Aluminum Can

PRODUCTION RATE: 1,500cph or (25cpm - Can Per Minute)

FILL PRODUCT: Beer

 

 

CAN UPLOADING TABLE

· Used for can storage before rinsing

 

GRAVITY TRACK RINSER

· Declining Twist Rinser Arrangement

Twist Rinse Decline Angle 30 

Rinser Spray Nozzles Piping have Single Point Connection

Track and Rinser are supported 

· Trackwork Rinser Infeed and Trackwork Rinser Discharge

· Fully Enclosed Spray Area to contain Spray Mist and Water Runoff

· Under Track Drip Pan with Drain

· Rinser manufactured with 304 stainless steel

· This unit has a solenoid to shut down water when machine is not operating

· Capable of 1500 (cph) Cans Per Hour or 25 (cpm) Cans Per Minute

Beer Filling Machine(4).png

 

   Fully Enclosed Spray Area

Capacity

1500 cans per hour

Suitable can diameter

φ50-φ90mm

Suitable can height

100-160mm

Weight

200kg

Length

1500mm

 

 

INFEED CONVEYOR

· Approximately 5 feet (1524mm) Single Lane Filler/Seamer Infeed Conveying Trackwork from the Rinser will Sweep onto the Filler/Seamer Infeed Conveyor

· Conveyor have Support Legs

· Conveyor Side Body manufactured with 304 stainless steel

· Should be single drive motor for entire conveyor mounted on discharge conveyor

 

 

FOUR HEAD CO2 INJECTION & FOUR HEAD LIQUIID FILLER UNIT

· Filler/Seamer Unit approximately 86” long x 39” wide & 78” high

2200mm Long x 1000mm Wide x 2000mm High

· Capable of 1500 (CPH) Cans Per Hour or 25 (CPM) Cans Per Minute

· 4 Head CO2 Inflatable Head for CO2 (carbon dioxide) Introduction for Oxygen evacuation              

· 4 Head Liquid Filling Station 

· Adjustable guide rails for can stability.

· Filler/Seamer have full 360 degree Plexiglas Shielding with doors. 

· Full Controls Package

One Controls Cabinet for Filler, Seamer, Conveyor and other Ancillary Devices

· Filler manufactured with 304 stainless steel

· There be a drain pan under the main machine

 Beer Filling Machine(1).jpg beer can filling line.jpg

 Beer Filling Machine.png 图片1.png图片2.png


SINGLE STATION DOUBLE SEAMING OPERATION

· Single Station Double Seaming Operation

· Before Lid Dropper applies Ends CO2 dose is Injected 

· Before Seaming Operation Automatic Lid Dropper

· Off Line Can Seamer Station

Cans are positioned to engage the Seaming Chucks  

The Seamer Tooling Head while Spinning Lowers Down to the Can to engages the Seamer Tooling 

· 2 Stage Seaming Operation (Seaming Chucks Included)

Stage 1 folds the End Curl around the Can Flange

Stage 2 irons the double seam into it final shape creating the airtight seal.

· Automatic Lid Dropper

· Seamer manufactured with steel plate and 304 stainless steel (see below picture).


DISCHARGE CONVEYOR

· Approximately 5 feet (1524mm) Single Lane Filler/Seamer Discharge Conveyor

· Conveyor Section have Support Legs

· One Single Motor drive the belt from the Infeed Conveyor through the Filler/Seamer to the end of the Discharge Conveyor

PLC: Mitsubishi

Motor Power: 0.55kw

· Conveyor Side Body manufactured with 304 stainless steel

 

DISCHARGE PACKING TABLE

· Discharge conveyor is capable of pushing onto Packing Table

· 90 degrees to the discharge conveyor and cable of holding 70 cans minimum

· There are rails to avoid Filled Cans from falling off

 

 

ADDITIONAL INFORMATION REQUESTS  

· Power:   

60 Hertz for USA Power Requirements

220VAC 3 phase preferred

· Compressed Air Requirements 0.5m3/min  

· Single Cabinet Controls Package for Filler & Seamer  

· Conveyor Belt Drive Motor

· Warranty

· 1 year Warranty

· Warranty includes: The components are warranted against manufacturing defective parts for a period of fourteen months from the date of delivery basing on eight hours/shift of five day working week. This warranty does not cover consumption parts and parts failure due to improper use of equipments, abuse normal wear parts and etc

 

 

 

Device Packaging information:

Wood case size: 2300mm X 1100mm X 2100mm

Gross Weight: 800kg 






Hot Tags: project of beer can filling line with capacity 2,000bph, China, manufacturers, suppliers, factory, price, for sale
Related Products

Inquiry