Carbonated Drink Sparkling Water Bottling Machines
1. PLC control: siemens 2. sus304 material 3. CE SGS certified 4. warranty: 2 years
Product Introduction
King Machine Co., Ltd. is one of the most experienced manufacturers and suppliers of carbonated drink sparkling water bottling machines in China. Please feel free to buy high quality machines for sale here from our factory. Good service and reasonable price are available.
Carbonated Drink Sparkling Water Bottling Machines

Product description
The solution for you:
DCGF series 3 in1 filler monoblock is composed of rinser, filler and capper, which is specially designed for filling your glass bottle.We design equilibrium pressure filling method with vacuum process and CIP cleaning fuction.
The advantage we provide:
Bottle inlet
1) Clamping heads use special design clamping head for glass bottle
2) Conveyor chain used 304 stainless steel material for long time use.
Bottle washer
3) The high-efficiency spray nozzle installed on the bottle clamp is capable of cleaning any part of the inner wall of the bottle and also saves rinsing water.
4) The rinser is driven by a driving system placed inside the frame of the machine through the gear transmission.
Bottle filling machine
1) Filling balance method.
2) The filling valves are made of SUS316L.
3) Long tube filling valves are adopted, with CO2 fully exchanging with air inside glass bottles, to decrease oxygen flushing effectively.
4) The high pressure foam stimulator is equipped to minimize the air remaining in the neck.
5) Centralized automatic lubrication system, simple for maintenance.
6) Before the capping system, we have a jet system to remove the beer foam at the top of the bottle mouth to make sure the Oxygen content is less than r0.15 mg O2 / l
7) Tolerances filling level: & plusmn; 2.0 mm
8) Bottle breakage rate: max 0.01% (1: 10,000)
Bottle capper
1) The cap dispensing channel is equipped with a reverse cap stop mechanism and a reverse cap removal mechanism.
2 The lid distribution channel is equipped with a photocell switch to stop the capper when there is no lid inside the hopper.
3) The capper is equipped with an inlet bottle detection switch.
4) A centrifugal way of organizing the lids is adopted to reduce the damage of the lids.
5) A lid inspection system is applied to control the lid lift on / off.
Discharge conveyor
1) The drive motor is inverted in frequency to synchronize with the filling line to prevent the bottles from falling.
2) The discharge conveyor is equipped with a photocell switch to slow down and stop the filling line in case of dropped bottles.
Hot Tags: carbonated drink sparkling water bottling machines, China carbonated drink sparkling water bottling machines manufacturers, suppliers, factory, Carbonated Soft Drink Filling Machine, Beverage Mixing Machine, Automatic Soda Packing Machine, Auto CO2 Gas Drink Filling Machine, Soda Water Bottling filling Machine
Send Inquiry
You Might Also Like







